德国QNix涂层测厚仪QNix7500/QNix7500M

德国QNix涂层测厚仪QNix7500/QNix7500M

QNix7500涂镀层测厚仪一体分体通用，可通过更换探头来满足不同的测量需求。探头可直接与主机连接，进行一体化测量，也可通过探头电缆线来与主机连接，进行分体测量。分体测量操作简单，可很大程度上避免误操作产生的误差。该仪器主机有普通型和记忆性两种，探头分为磁性探头、涡流探头及双用探头，探头的测量范围有0-2mm和0-5mm两种，用户在购买该产品时要根据需求选购合适的探头，如有不明白的地方敬请来电咨询。
 

德国QNix涂层测厚仪QNix7500/QNix7500M产品优点：

只需调零，无需校准 
测量精度高 
一体分体通用 
可配多种探头 
记忆型带存储功能

德国QNix涂层测厚仪QNix7500/QNix7500M可选探头：

Fe铁基探头：    0－2000μm    0－5000μm 
NFe非铁基探头:  0－2000μm    0－5000μm 
NFe/Fe两用探头：0－2000μm    0－5000μm

Nix® 7500 / 7500 M: Proven hand - held measuring system with interchangeable probes for a broad spectrum of use.
QNix® 7500 / 7500 M - modular measuring system
The modularly built QNix® 7500 offers mobility, simplest operation, highest measuring accuracy up to 5000 μm and unusual application variety. As a really small and handy gauge, QNix® 7500 can be used either with a directly inserted miniature measuring probe or with a measuring probe alongside an adaptor cable for non-destructive measurements of coating thickness on all Fe- and NFe-substrates.

Place and read
With a simple exchange of the probe, QNix® 7500 can be optimally adapted to suti the measuring task. For these tasks, there is a comprehensive probe program available. Probe change occurs via simple pull out and insert. You can immediately start using the gauge again.